Detailing Guides
Videos, articles, infographics and more on washing, polishing and ceramic coating.
Matte Finish Care
Articles and vides on how to maintain a matte finish car in its original appearance.
How Do I Apply a Ceramic Coating Without Messing It Up?
Applying a ceramic coating, even a professional-style kit, is easier than you’d think. The key is thorough surface prep, achieving full coverage and leveling properly to avoid high spots.
Quick Answer
Work a small area at a time and follow the right steps.
Beyond following the ceramic coating manufacturer’s specific application instructions, the most important thing to remember while applying a ceramic coating is to work only a small area at a time. Otherwise, the coating may begin to cure before you can level.
Applying Your Coating
Basic Ceramic Coating Process
Apply
Divide large panels into smaller sections. Apply the coating to one small area at a time, crosshatching and overlapping by 50% to get full coverage.
Level
Look for flashing. Once the coating has flashed, wipe with a clean microfiber towel to level the coating, then flip the towel and buff to remove excess.
Inspect
Use an inspection light to check for high spots. Use a fresh microfiber towel to re-level any visible high spots, then repeat the process across all sections.
Free Printable Application Checklist
Catch Ceramic Coating Mistakes Before It’s Too Late.
Keep our ceramic coating application checklist beside you as you work. Follow the process section by section, from spreading the coating to checking your results before moving on. This guide will help you:
Work in manageable sections and apply the coating evenly
Watch for flashing, level the coating and remove excess
Inspect for high spots and correct them before moving on
Free PDF · Printable · Delivered by email