1-STEP PAINT CORRECTION.
1-STEP CERAMIC COATING.
NSP Z1 removes swirls and scratches to reveal a stunning finish while applying a durable, 1+ year ceramic nanocoating.
Removes 99% of Defects
Composite microsphere abrasive sizes cut, buff and finish all in the same step
Produces Brilliant Finish
Stunning shine is made even more brilliant with ceramic coating applied during correction
Fast Results, Less Product
Concentrated formula removes defects in fewer passes and with less product
1+ Year Ceramic Coating
Applies 1+ year ceramic nanocoating as defects are eliminated from the finish
Unbelievable
Used with a yellow Rupes pad (plus medium cut microfiber in some areas) and the cut was unbelievably fast. Leaves behind a very noticeable glossy finish with the coating!
The Future of AIO is Ceramic
I’ve been saying for years the next big development in detailing is the ceramic AIO. Now Dr. Beasley’s has finally done it, and the results speak for themselves.
AIO Protection That Lasts
Quite amazing. With the right pad & machine combo you can get very good correction out of it while leaving behind little to non micro hazing and most importantly protection that lasts!
Behind the Detail Ceramic Coatings Paint Correction Professional Detailing
Mike Phillips Revives 1965 Corvette Sting Ray with NSP Z1
Behind the Detail Paint Correction
NSP Z1 Case Study: Ford Mustang Restored by ELH Detailing
Behind the Detail Ceramic Coatings Paint Correction
Ales & Details: The NSP Z1 Challenge
Behind the Detail Ceramic Coatings Paint Correction Professional Detailing
Mike Phillips Reviews NSP Z1
Behind the Detail Ceramic Coatings Paint Correction Professional Detailing
NSP Z1 Case Study: 2003 Ferrari 360
NSP Z1 is a corrective primer. It does everything a polish does — remove swirls and scratches and produce a brilliant shine — while also adding a durable ceramic nanocoating.
NSP Z1 corrects paintwork with considerable cut, and also applies a genuine ceramic nanocoating. Other products either:
A. Don’t correct.
B. Don’t correct well.
C. Are sealants and not ceramic coatings.
D. All of the above.
NSP Z1 can work with many pads depending on the level of cut you’re looking for.
For light swirls and fine scratches, try a foam finishing pad. For heavier micro-marring and deeper scratches, try a more aggressive microfiber pad. Keep in mind that more aggressive pads may require a follow-up step with a finishing pad to achieve the glossiest finish possible.
Not sure where to start? Tape off a small area and test different pads, starting from the least aggressive and working your way up. When you find the results you’re looking for, use that pad on the rest of the vehicle.
We recommend a DA/Random Orbital. Rotary machines can be used but we recommend this only for experienced users. If using a UDOS 51e buffer, start with the P1 setting and move to longer throw settings based on your results.
Start with a low-to-medium speed while testing, then accelerate based on your results.
Only a small amount of pressure is required — applying too much pressure may result in removal difficulty. If you are looking for more cut, use a more aggressive pad instead of applying more pressure with a less aggressive pad.
Thanks to its cool-running gel that doesn’t sink into foam pads, Z1 can be worked for a considerable amount of time.
Yes! NSP Z1 applies a ceramic nanocoating while removing defects. This coating is durable for a year or more with proper maintenance.
Yes! Any ceramic coating will benefit from a Z1 base.
Wash every two weeks with Ceramic Body Wash and reinforce every few months with AdvanceCoat: Gloss.
It can, but for best results we recommend machine application — you’ll get a better finish with much less work!
Yes! You can use NSP Z1 on headlights, glass and even chrome!
No. NSP Z1 does not contain polishing oils so it doesn’t require use of a panel wipe or IPA to remove them.
Absolutely not! Any transfer to other surfaces can be wiped away with ease.