Add to wishlist
Dr. Beasley's Film Coating Kit Ceramic Coating for Paint Protection Film, Vinyl Wraps
Film Coating Kit - Image 2
Film Coating Kit - Image 3
Film Coating Kit - Image 4
Film Coating Kit - Image 5
Film Coating Kit - Image 6
Dr. Beasley's Film Coating Kit Ceramic Coating for Paint Protection Film, Vinyl Wraps

Film Coating Kit

$74.99

$74.99

90-day return policy

Dr. Beasley's three red crosses logo

OUR MONEY-BACK GUARANTEE

If you are not satisfied with a Dr. Beasley’s product you’ve purchased, you may return it within 90 days of receiving your order for a full refund of the product’s cost before taxes & shipping. 

To request a return, please fill out this form. Include your order number in the subject line, and the product(s) to be returned in the message box, along with the reason for the return. Return requests will be responded to within 1 business day.

Ships within 1 business day

Free ground shipping on orders $50+

Dr. Beasley’s FILM COATING KIT is a ceramic coating system designed specifically for PPFs, wraps, vinyl, and other thermoplastics. It protects against yellowing, fading, etching and staining, while also keeping self-healing properties and making the surface superhydrophobic. Durable for 3 years or more with proper maintenance.

BONDS WITH PPF
INCREASES UV RESISTANCE
PRESERVES SELF-HEALING PROPERTIES
ALSO WORKS ON VINYL WRAPS

Do not open this product until ready for use.

DESIGNED TO

KEEP YOUR FILM FROM YELLOWING OR FADING

Paint Protection Films (also known as PPFs or clear bras) and wraps are often advertised by their manufacturers as resistant to the yellowing or fading caused by UV rays. That’s a great selling point, but when you’re paying upwards of a thousand dollars to get a film installed, you’ll want to be absolutely certain you won’t find yourself replacing a yellowed PPF years down the line. Dr. Beasley’s Film Coating Kit gets you that peace of mind – it’s packed with powerful UV/UVB-inhibitors that prevent the chemical reaction responsible for yellowing and fading. Your film will stay clear, no questions asked.

PRESERVES

SELF-HEALING PROPERTIES

These days, many vinyl wraps and PPFs come with amazing self-healing properties. Just expose a micro-marred area to direct heat and your wrap bounces back. Problem is, installing a hard ceramic coating on top of your film suffocates these properties, leaving a valuable feature useless. You shouldn’t have to sacrifice self-healing just to get your film protected. That’s why we formulated our Film Coating for flexibility, so your wrap will have the space it needs to keep filling in blemishes. Your film will keep bouncing back while still getting the protection it deserves.

EFFECTIVELY

KEEPS CONTAMINANTS FROM STICKING FOR EASY CLEANING

PPFs and vinyl absorb the damage caused by stubborn contaminants like acidic bug guts and bird droppings, saving your paint from etching and staining. Only problem is, now you’re stuck with an etched and stained film, leaving you to either spend thousands getting it replaced or accept it looking terrible. Sure, you could try and wash the gunk off before they etch the surface, but you can’t pressure wash film without risking it peeling back. In cases like these, having a Film Coating over your PPF will save you time and money. Instead of damaging your film, contaminants will rest on top of the coating thanks to its superhydrophobic properties. Your film will be protected from etching and staining while tough messes will wash away with ease.

  1. 1. CLEAN

    Before applying Film Coating, ensure the PPF or clear bra is free of contaminants using Dr. Beasley's Film Cleanser.

  2. 2. SPRAY

    Spray Film Coating Prep onto a film-wrapped panel and remove with a microfiber cloth. This will remove any excess residues and provide anchor points for Film Coating to bond with.

  3. 3. PREP SUEDE CLOTH

    Wrap the suede cloth around the foam block applicator and apply ~10 drops of Film Coating down the cloth in a line.

  4. 4. APPLY

    Start by applying Film Coating in vertical lines down the panel. After covering the panel with vertical lines, go back and repeat with horizontal lines. This crosshatch pattern will ensure full coverage. Avoid getting the product in panel gaps.

  5. 5. WIPE

    When you see the product flashing (it will appear slightly iridescent), wipe the panel with a clean, dry microfiber towel.

  6. 6. REPEAT

    Repeat steps 4-5 on each panel until all of the vehicle's film-wrapped surfaces are coated. Reapply several drops of Film Coating on your applicator after a few panels.

  7. 7. LET CURE

    After coating, leave the vehicle undisturbed for one hour.
Do not apply in direct sunlight.
Do not allow this product to freeze during storage.
If applied in temperatures less than 65-70 degrees Film Coating may need more flash time. In warmer, more arid climates Film Coating will need less flash time.
Keep vehicle completely dry between applications and for at least 1 hour after final application. After 1 hour the vehicle can be exposed to light rain without affecting the bonding process.
Full cure will take 24-48 hours. After fully cured the film wrapped surfaces will be noticeably glossier and the coating will be fully set.
Avoid washing the vehicle with soap for 7 days after application..
Keep bottle closed when not in use.
Youtube video
Dr. Beasley's Film Coating Kit Instructions

HOW DOES FILM COATING KIT WORK?

Film Coating works by creating a cross-linked bond with your PPF’s thermoplastic surface, fostering a permanent barrier that lasts the lifetime of the film. Once bonded the coating will resist micro-marring and etching, inhibit UV rays, bead and sheet liquids, and preserve self-healing properties.

SKU fk-11
Shelf Life (Unopened) 5 yrs
Shelf Life (Opened) 2 yrs
Film Coating Prep Safety Data Sheet View Here
Film Coating Safety Data Sheet View Here
Right to Know View Here
DURABILITY 3 Years (with proper maintenance)
Consumption 1 kit/average car body
Country of Origin Made in the USA

Customer Reviews