90-day return policy
Ships within 1 business day
Free ground shipping on orders $75+
NSP CoreCut Results
Foam Cutting Pad on Clear Coat
NSP CoreCut+ Results
Wool Buffing Pad on Gel Coat
Same Abrasive Size. More Aggression.
Whether you’re correcting a black car with swirls from years of automatic washes or a neglected boat with chalky white oxidation, a conventional compound isn’t going to cut it — pun intended.
Jim Lafeber (Dr. Beasley’s founder, president, and chemist) saw this first hand at his detailing shop.
Christyan was struggling to level some deeper scratches in a persnickety customer’s black paint despite using Dr. Beasley’s most powerful primer, NSP 150.
How could Jim raise the aggression?
Bigger abrasives? They leave swirl marks and generate tons of surface heat, risking paint burning.
But what about changing the shape and texture of the abrasive itself?
So, Jim sourced two new multi-faceted abrasives with engineered textures for heavy cut while keeping a small abrasive size.
Once the formulation was finalized, Jim handed CoreCut off to Christyan.
Within hours he perfected the paint to such a high level a finishing step was barely needed.
Needless to say, that persnickety customer had his expectations shattered.Â
These new abrasives make NSP CoreCut and CoreCut+ powerful enough to level severe defects in both car paint and marine gelcoat.
Learn more about NSP CoreCut technology below.
Precision Correction
Heavier Cut with Faceted Abrasives
When most polish and compound manufacturers need a more aggressive abrasive, they go bigger. But bigger means more surface heat and horrible swirls. Instead of scaling up the abrasive, NSP CoreCut utilizes a faceted shape that levels 1500 & 1200 grit sanding marks without scarring the paint or overheating it. It’s the safest way to pull out severe defects so you can get a beautiful shine while keeping the clear coat healthy.
Safe on Paint
Aggressive Enough for Marine Gelcoat Restoration
Restoring the hardened gelcoat on a boat’s hull is difficult for even the most aggressive compounds. The hyperfaceted abrasive texture utilized by NSP CoreCut+ amplifies its cutting ability, allowing it to power through heavy swirls on neglected boat finishes. Paired with a powerful buffing machine, a cutting pad and lots of stamina, NSP CoreCut+ is the best way to restore any gelcoated vessel.
100% Inorganic Formula
No IPA Wipe Required
Organic oil residue left behind by conventional compounds makes it harder for ceramic coatings to bond, requiring you to clean them with an isopropyl alcohol solution first before you can coat. Nano Surface Primers like CoreCut are 100% inorganic and leave no oil-based residue behind. Just wipe with a microfiber towel and proceed to ceramic coating, locking in the beautiful shine you’ve created.
Protection Prep
Primes Paint for Durable Ceramic Bond
Ceramic coatings are the ultimate way to protect the brilliant shine you’ve worked hard to produce, locking in a reflective finish while making it harder for contamination to stick. CoreCut and CoreCut+ starts building your ceramic coating before the correction step is even over, priming the surface with anchor points and adding film build so the coating forms the most durable bond possible. Paired with a high quality ceramic coating, NSP CoreCut will deliver protection for years to come.
Aggression Scale
