NEW
Add to wishlist
Trim Coat Pro
Trim Coat Pro - Image 2
Trim Coat Pro - Image 3
Trim Coat Pro - Image 4

Trim Coat Pro

$34.99

From: $34.99

90-day return policy

Dr. Beasley's three red crosses logo

OUR MONEY-BACK GUARANTEE

If you are not satisfied with a Dr. Beasley’s product you’ve purchased, you may return it within 90 days of receiving your order for a full refund of the product’s cost before taxes & shipping. 

To request a return, please fill out this form. Include your order number in the subject line, and the product(s) to be returned in the message box, along with the reason for the return. Return requests will be responded to within 1 business day.

Ships within 1 business day

Free ground shipping on orders $50+

Restore faded exterior plastic and rubber trim with TRIM COAT PRO, a dye-free ceramic trim coating that brings back a deep, factory-new appearance without oily shine. It bonds to exterior trim to help protect against UV exposure, oxidation, water, and grime while leaving behind a clean OEM satin finish.

RESTORES FADED TRIM
NO DYES OR OILS
HELPS RESIST UV FADING
HYDROPHOBIC CERAMIC PROTECTION

BRING FADED TRIM BACK TO LIFE

Exterior trim gets hit with sun, weather, road film and wash chemicals every time you drive. Over time, that rich factory-black look starts turning gray, chalky and tired. Trim Coat Pro is built to reverse that faded appearance without making trim look overly shiny or dressed. It darkens plastic and rubber trim back toward its original finish, leaving behind a clean OEM satin look that feels right at home on modern exterior surfaces.

RESTORE WITHOUT DYES OR OILS

A lot of trim products take the shortcut: load the surface with dye, silicone or oil and call it restored. The problem is, those ingredients can stain, streak, attract dust or wash away too quickly. Trim Coat Pro takes a cleaner approach. Its dye-free, silicone-free formula enhances the original material instead of covering it up, so you get deep, rich trim without the mess of a traditional dressing.

CERAMIC PROTECTION FOR PLASTIC AND RUBBER

Trim Coat Pro does more than improve appearance. Once applied, its ceramic technology bonds to exterior plastic and rubber trim to help protect against UV exposure, oxidation and environmental contamination. The surface becomes more hydrophobic, helping repel water and grime so treated trim stays cleaner and easier to maintain.

BUILD DEPTH WITH EACH LAYER

Not all trim fades the same way. Lightly faded trim may only need one coat, while heavily weathered plastics can benefit from multiple layers. Trim Coat Pro is buildable, letting you add depth as needed until the surface reaches the look you want. The result is trim that looks darker, cleaner and more complete, without the artificial shine of a dressing.

  1. 1. CLEAN TRIM THOROUGHLY

    Remove dirt, oxidation, old dressings and built-up grime from the trim surface.

  2. 2. DRY COMPLETELY

    Make sure the trim is completely dry before application. Moisture can interfere with bonding.

  3. 3. APPLY TO APPLICATOR

    Apply a small amount of Trim Coat Pro to an applicator or microfiber towel. Add more product as needed to keep the applicator evenly loaded.

  4. 4. SPREAD EVENLY

    Work Trim Coat Pro into the trim using smooth, even passes. Make sure textured areas, edges and corners are fully covered.

  5. 5. LEVEL IF NEEDED

    Allow the coating to sit briefly, then wipe level with a clean microfiber towel if excess product remains on the surface.

  6. 6. ADD LAYERS IF DESIRED

    Apply additional thin layers to deepen the restored appearance on heavily faded trim.

  7. 7. LET CURE

    Keep treated trim dry for 48 hours after application for best bonding and performance.

WHAT DOES TRIM COAT PRO DO?

Trim Coat Pro restores faded exterior plastic and rubber trim while adding ceramic protection against UV exposure, oxidation, and environmental contamination. It darkens weathered trim back toward its original appearance and helps keep it looking clean, rich, and factory-new.

IS TRIM COAT PRO A DYE?

No. Trim Coat Pro is dye-free, so it restores the look of trim without relying on black pigments that can stain paint, hands, or towels. Instead, it uses ceramic technology to enhance the original material and protect it from future fading.

CAN I APPLY MULTIPLE LAYERS?

Yes. One coat is often enough for newer or lightly faded trim, but heavily faded plastic may need additional layers to build depth. Allow each layer to set before applying the next, then level the surface as needed for an even finish.

WHAT SURFACES CAN I USE TRIM COAT PRO ON?

Trim Coat Pro is designed for exterior plastic trim, rubberized trim, mirror housings, bumper plastics, fender flares, cowlings, roof rails, wiper bases, side skirts, and similar exterior plastic or rubber surfaces.

WHAT SURFACES SHOULD I AVOID?

Do not use Trim Coat Pro on painted surfaces, glass, interior surfaces, tire rubber, or tire tread. If you are unsure about a surface, test in a small inconspicuous area before applying more broadly.

SHOULD I CLEAN THE TRIM BEFORE APPLYING TRIM COAT PRO?

Yes. Proper cleaning is essential. Dirt, oxidation, and old dressings can interfere with bonding, so trim should be thoroughly cleaned and completely dry before application. For best results, clean exterior trim with Foaming Tire Cleanser before applying Trim Coat Pro.

SKU trcp
Shelf Life (Unopened) 5 yrs
Shelf Life (Opened) 2 yrs
Safety Data Sheet View Here
Country of Origin Made in the USA

Customer Reviews