Coating Maintenance Wash Kit

STEP ONE

Fill foam gun reservoir with water and add 1 oz. (2 capfuls) of Dr. Beasley’s Ceramic Body Wash. Water/soap ratio may vary based on foam gun.

STEP TWO

Rinse entire vehicle thoroughly, then coat with a thick layer of foam. Let sit, then rinse to release loose contaminants.

STEP THREE

Coat vehicle again with a thick layer of foam. Using wash pads, agitate the suds gently to remove remaining contaminants.

STEP FOUR

Use a Grit Guard-lined bucket of water as needed to rinse wash pads of contaminants.

STEP FIVE

Rinse vehicle of all remaining soap.

STEP SIX

Using an air blower and lightly damp microfiber towels, dry vehicle as thoroughly as possible. This will reduce the chance of water spots appearing.